16154140 SnowDogg Angle Cylinder 2 x 12 CM Plow

Here is a New Factory SnowDogg 16154140 Angle Cylinder.

This is a single acting cylinder used on the CM for moving the plow left and right. It attaches to the A-frame and moldboard. Each plow uses two. The CM plow is their large commercial plow that comes in 9', 10', and 11'. 

The hole for the pin measures 7/8" and the chrome ram diameter is 2". The port is in the top of the cylinder. End to end in the closed position is 20.25", weld to weld on the tank is 12".

Stamped in the cylinder is 3014681.

For related diagrams and parts lists, check this document.